Getting Started on Windows

From The Al`Kabor Project Wiki
Jump to navigation Jump to search

Obtaining and Running the Client[edit]

TAKP's client is from the December 2002 era. This is the actual client used in the era TAKP is emulating, and the oldest client in use for any emulated server. Please familiarize yourself with the differences on this page http://wiki.takp.info/index.php?title=Server_Comparison

It is highly recommended to get the latest freethemouse eqgame.dll update with the client included as a small separate download link. The freethemouse eqgame.dll allows you mouse over from one client window to another without the need to alt-tab. There are also other features and fixes in the eqgame.dll updates. More info on the current version of the freethemouse update can be found here and a new update is here. If you have any issues, check the Known Issues and Troubleshooting section.

Download the client zip:

  1. The supported windows client v2.1 (zipped, includes all files including v3.5.3.2c of the eqgame.dll already) is available here
  2. Alternate TAKP v2.2 client package is available here - changelog on forums here - md5= 002741614acef667b9c70e55a5a766e0
    1. Additional download link: https://sahaquiel.us/quarm/TAKP2.2.zip - use this if you experience bandwidth download throttling error IF YOU ARE DOWNLOADING PROJECT QUARM, USE 2.2
  3. FreeTheMouse v3.6.4 here

Unzip the client zip into its own folder on the root of your C drive (or other drive letter), do not put this under under the \Program Files or \Program Files (x86) folders. Run the eqgame.exe to launch the game.

The above is for playing on the TAKP server. If you are playing on another server that uses this client as a base, you will need to apply the appropriate files from that server afterwards to connect to their server, otherwise you will get a disconnected message when you try to connect to the wrong server in the client. TAKP and other servers will require different folders for your clients. Project Quarm's discord is here and unaffiliated, however it uses TAKP's source, account management system, and login server.

Note: Some users have reported that their antivirus software is deleting a file that is required. If you are not able to log in, this could be a cause. We highly recommend you create an exclusion in your antivirus software ahead of time for the folder you are going to extract these files into. Create the folder exclusion, then download the files into that folder and extract them from within that folder. You will need to check with your AV vendor if you are unsure how to do this. For those on Windows 10 using only the built in Defender antivirus, for your convenience we have created the following quick guide: set Windows Defender Exclusion on Windows 10

To verify your 3rd party antivirus or windows defender is not deleting or moving files from the TAKP folder, the folder should have 2,637 files / 96 folders from a clean zip "supported windows client v2.1" extraction. For the v2.2 client the folder should have 2,772 files / 126 folders.

FileAndfolderCount01.png TAKPv22-client-files.png


Other items kept here for history tracking and typically are not needed:

Details on The Supported Windows Client[edit]

The supported client linked above requires almost no setup-- you need merely unzip it, copy the updated files from the 3.53 update into the folder, and run eqgame.exe. From here you log in with one of your game accounts after the client asks for some graphics configuration settings. If you get errors, try running eqgame.exe as administrator.

A MD5 hash list of the client files is available.

This client is configured/modified in the following way:

  • Virtually all unnecessary files removed. No zones beyond PoP. Client size is 2.28 GB.
  • All character files, logs and client settings deleted. Client is about as clean as it gets.
  • Haynar's modifications allowing alt-enter full screen mode, a built-in FPS limiter, automatic renamed client windows, and other quality of life improvements.
  • The executable has been modified to allow the mouse cursor to leave the game window. (Secrets' mod)
  • EQW functionality has been merged into eqgame.exe, eliminating the need to run eqw.exe.
  • Beastlord MGB AA implemented in the UI.
  • Desktop gamma changes no longer crash the game.
  • The missing sun and moon put back in. (Sony apparently broke it in our era)
  • HotKeyNet with a simple client switcher script is included.
  • Seven custom UIs included.
  • Missing environmental sound effects files (emt and xmi) added. Volume adjusted in these files since the client has no environmental sound volume slider.
  • The zip archive (but not the installer) has the Luclin zone music files added. (Daybreak recently released these)
  • Missing strings added to eqstr_en.txt.
  • readonce.txt edited with server staff credits.
  • eqhost.txt points to TAKP.
  • DataRate.txt set to 9.0.
  • MP3 window made functional.

eqclient.ini is completely default save for:

  • Alliance chat autojoin.
  • Target Group Buffs turned on.
  • ShowAlarmWindow set to false.

Recommended Configurations and Changes[edit]

Hybrid Graphics Support[edit]

Some laptops containing hybrid graphics, with discrete graphics processing capabilities, often do not get utilized by the PC Client. This is due to the graphics in the older PC client being based on MS DirectX 8. A DirectX wrapper has been found that can successfully enable use of the discrete GPU, over the slower on board graphics. If you are experiencing performance issues on a relatively new laptop with an integrated GPU, give one of the following two options a try.

Option 1: You can download the dgVoodoo2 wrapper at dgVoodoo2. This specific Version 2.8.2 seems to work well on AMD and NVidia based hybrid graphics.

To install this wrapper, you need to open the downloaded zip file, and copy the D3D8.dll file found in the MS subfolder, and put this in the same folder as your eqgame.exe. Then just run the eqgame.exe normally. DO NOT PUT THIS FILE IN YOUR WINDOWS SYSTEM FOLDER!!! After selecting this display adapter, the game should run normally, with the exception of changing screen resolutions. If you change the display resolution in game, it WILL crash the client. So only do this in a safe location. You can optionally change the resolution by hand in the eqgame.ini.

In order for dgVoodoo to fire, you have to set eqgame.exe to use High Performance Mode in your NVidia control panel. Refer to below screenshot

NvidiaPerformanceSetting.png

If you have an AMD card, find an equivalent setting in the Radeon control panel.

If the wrapper is loaded, in game it will have a "dgVoodoo" watermark in the lower right corner of the display. The performance difference is usually very noticeable. But if you want to be sure, you can use software such as GPU-Z, to monitor the load on the discrete graphics card. Remove the watermark by running dgVoodooCpl.exe, clicking the DirectX tab, and unchecking 'dgVoodoo Watermark.' OR you can locate the dgVoodooWatermark line in your dgVoodoo.conf file and make sure its set to false: "dgVoodooWatermark = false" If it doesn't exist, create it.

Option 2: DXwrapper from https://www.dropbox.com/s/phvxgl6ojf2xqih/DxWrapper.zip?dl=0. This wraps the dx8 to dx9. It will use the amd graphics on a switchable graphics laptop, even though it selects the onboard graphics at run time. By using GPU-Z, you can see which graphics card is doing the work. What doesn't work, is adjusting the gamma from the slider in game. Just put these 3 files in your TAKP install folder and give it a try. If it doesn't work or you don't see performance gains, then remove them.

Limiting Your Frame Rate In Windows[edit]

The supported client includes a frame rate limiter not found in the original client. You can change foreground and background FPS limits (this gets put in automatically if absent) by editing these lines in your eqclient.ini: 

[Options]
MaxFPS=60
MaxBGFPS=30
MaxMouseLookFPS=60

The recommended frame rate for MaxMouseLookFPS is 60 (or 30) to avoid mouse look issues. It's 0 (unlimited FPS) by default. Very high frame rates will make mouse look less usable. However you can change these if desired. You may want a higher background FPS for better autofollowing. These features (among other fixes) are a part of the latest eqgame.dll you would have downloaded under the Obtaining the Client Section for Windows.

Switching Client Windows with HotKeyNet[edit]

The supported client comes with HotKeyNet bundled with it. HotKeyNet is a program to assist in multi-boxing in games. Also included is a simple script that is configured to make the numpad 1-3 keys change focus to your three client windows. In this way you can switch client focus without alt-tab.

  • Start HotkeyNet.exe. Script.txt should auto-load.
  • Press Left Ctrl+F12 to open up 3 client windows at once.
  • Use the default hotkeys NumPadEnd, NumPadDown, NumPadPgDwn to switch between Client windows.

Optional Steps[edit]

The supported client comes with several additional custom UIs. To switch to one of these, run the slash command /loadskin <ui> 1. The 1 is optional-- it will keep your current window positions. Loading UIs via the options window will not work.

To use another loading screen, grab the file above and extract it to your desktop. You'll see folders for classic + the 4 expansions. Choose the loading screen you want to use, and copy the bmpwad8.s3d file there to your client's directory, overwriting the existing file. The .bmp files in each directory are only for reference and are not needed by the client. This works for both the PC client and OSX. The location of your client files under OSX is normally /Applications/EverQuest.app/Contents/Resources

EQClient.ini settings[edit]

The eqclient.ini file contains a list of settings that can be changed to suit your preferences, many of which cannot be changed in-game through the options window.

In Windows, the eqclient.ini is located within your EverQuest directory, wherever eqgame.exe or eqw.exe reside.

Some commonly changed settings include:

  • WindowedMode=TRUE/FALSE - This line must be typed out at the top but below [Defaults].
  • NewUI=TRUE/FALSE - Our client still has the old pre-Luclin UI for nostalgia mode.
  • Log=TRUE/FALSE - Setting this true will automatically turn your log file on when entering the game.
  • CombatMusic=TRUE/FALSE - Enable or disable melee combat music.
  • ChannelAutoJoin=alliance - The Alliance channel is used as the global chat channel for the server.
  • TargetGroupBuff=1 - This will allow you to buff groups with group buff spells from outside the group by targeting a member of the group.
  • AttackOnAssist=FALSE - This will allow you to assist another player without automatically enabling auto attack.
  • MaxFPS= - This is the framerate you limit the foreground client window to. If this is set too high, it may consume too many system resources. Typically 60 is a good number to start with and adjust if necessary. A setting of 0 disables the limit. YMMV
  • MaxBGFPS= - This is the framerate you limit the background client windows to. You don't want this too low, since it will affect autofollow ability. But, if you have it too high, it may consume too many system resources. 60 is typically good. A setting of 0 disables the limit. YMMV
  • MouseRightHanded=1 - Switches mouse button orientation.
  • MaxMouseLookFPS= - Allows you to set the mouselook FPS to help with mouselook slowness. If your mouselook is too slow, try adjusting this to 60 or 45. A setting of 0 disables the limit. YMMV
  • AllLuclinPcModelsOff=TRUE - This disables Luclin models. This also allows use of the famous horse bug that existed on AK where you don't have the limitations of horse speed up/down that you do with Luclin models on.
  • [VideoMode]:
Width=1920
Height=1080
(match your display settings with the proper height and width prior to launching the game)
  • Velious armor textures:
LoadVeliousArmorsWithLuclin=TRUE
LoadArmor17=TRUE
LoadArmor18=TRUE
LoadArmor19=TRUE
LoadArmor20=TRUE
LoadArmor21=TRUE
LoadArmor22=TRUE
LoadArmor23=TRUE

Velious armor textures are not enabled by default as they can cause an issue with Vah Shir armor not displaying. Most players would probably prefer them on however.

In-game maps[edit]

While the client doesn't allow for in-game maps (that was added during the LoY expansion), you can however use a 3rd party Windows application called ZlizEQMap in order to achieve something similar. It involves keeping logging on and then binding sense heading and /loc to a movement key while an app continuously looks for these. It then will display your location on the current zone map and direction (if sense heading was successful). This doesn't work well for all zones, but works surprisingly well for most. The details can be found here:

ZlizEQMap pack for TAKP

Audio triggers and overlays[edit]

This client predates the built in audio triggers that exists in the official current client. However, you can accomplish the basically the same thing with a third party app such as Gina. It continuously parses your log file for specific text and you can either have it trigger a sound or pop an overlay window on your screen. Or you can do both. Unfortunately, this is only supported on PC and not Mac.

For more info browse here: Gina homepage

DPS parsing[edit]

On PC, there are a few options. Gamparse seems to work pretty well here. You can parse live or afterwards.

Download the latest 1.5 version from here: Gamparse at Elitegamerslounge

Run it to install it. You may need to close and reopen it a few times for it to update to v1.6.1.7

Known Issues and Troubleshooting[edit]

Connectivity Issues[edit]

"Sometimes my character's spell gems stay greyed out and the server stops responding to my client."

This is what is commonly referred to as 'desyncing'. The precise cause(s) of the problem are unknown (else they would get fixed up) but there are things that can be done to reduce the chance of this occurring.

  • Ensure that your internet connection is uncongested. Try using a wired connection to your router instead of wifi.
  • Make sure your firewall isn't blocking client ports.
  • Make sure your frame rate is limited if running the Windows client.
  • Use one of the clients linked above if you're using a different one.
  • Try connecting over a VPN. Some users claim this helps.

Reports from users experiencing this issue are important in order for developers to identify the cause. If you experience this issue, please report it on the forum and explain what you were doing at the time it occurred.

See also this post summarizing connection issues:
Connection Issues for TAKP

Chat channel drops[edit]

If your chat channels regularly drop, you can try adding ChatKeepAlive=1 in the defaults section of the eqclient.ini, this will increase frequency the keepalives are sent to every 15 seconds.

If one packet is dropped that is the keepalive from Client to Server, you will time out before it triggers again, if the ChatKeepAlive=1 is not set. So this specific condition can contribute to chat channels dropping.

Issues running the game[edit]

If you see any of these when trying to first run the game:

  • windows application error
  • the memory could not be read

This could be caused by WinEQ2 running in the background which is not compatible with this client. Exit the WinEQ2 application and try again.

It could also be caused when Directx 9c or a Visual C runtime is not installed. Try installing the following, rebooting and trying again:

Other general issues[edit]

Pauses or lag when opening bags or opening UI elements.

  • Ensure that your antivirus software has exclusions set for the EQ folder and the UI files underneath it. Remember, Windows 7 and Windows 10 come with built-in antivirus software. A quick Windows 10 guide for setting exclusions is found here.


Why is my non-QWERTY keyboard not working correctly in game?

  • The default client is packaged with the QWERTY keyboard layout file. This can be changed by replacing the keyboard.txt in your TAKP folder with the one made for your locality keyboard.txt by nationality. Please note that several are still missing and will be uploaded as we can find/make them


General mouse issues

  • Usually caused by DPI Scaling setting in Windows. Need to set it to 100% DPI scaling. You may find this forum thread useful: Mouse issues


EQMAIN.DLL error running the game

  • This happens if you try to launch the game from Windows Search results. Don't launch from search results. Navigate to the folder manually and run eqgame.exe directly, or create a desktop shortcut, or launch via hotkey.net
  • Also this error can happen if your anti-virus deletes some game files. Make sure you set AV exclusions and the game files aren't being quarantined

Eqmain-dll-error.png


General graphics performance issues/crashes

  • Check the hybrid graphics support section above. More info here: Graphical issue


Fuzzy/unclear text

In each of your EQ folders:

  • Right click eqgame.exe, properties, compatibility tab, change DPI settings, check the box "Override high DPI scaling behavior" and select "Application" in the dropdown.


Gamma slider doesn't work / how to set Gamma in Windows 10

For some people, the in-game Gamma slider does nothing. Follow the below steps on how to increase Gamma on Windows 10 machines:

Right click on Desktop -> choose "Display Settings"

Click on "Advanced display settings"

Click on "Display adapter properties for Display 1"

Click on "Color Management" tab, then click on "Color Management..." button

Click on "Advanced" tab, then click on "Change system defaults..." button at the bottom

Click on "Advanced" tab, then click on "Calibrate display" button at the bottom.

A "Welcome to Display Calibration" window will pop up. If you use multiple monitors you need to move this window to the monitor you wish to adjust gamma on. Click Next, Next, Next.

Now in the "Adjust gamma" screen, move the slider up a little bit until desired setting is found. You can have your EQ running next to it to find a suitable level, and click Next when done.

You can click on "Skip brightness and contrast adjustment", and click Next past the color balance screens, and untick the "Start ClearType Tuner" and click on Finish.

Now back at the Color Management - System Defaults screen, tick the "Use Windows display calibration" setting and click Close.

Now your gamma has been increased for this monitor!

Note: If the Gamma resets on next reboot, you need to get back to the "Color Management - System Defaults" screen, and re-tick the "Use Windows display calibration" setting and click Close. This will bring back your previous settings.


Eula acceptance window positioning

  • This is the first window you see when you run the game. Settings for this are in the eqw.ini file in your EQ folder. Positions are set numerically according to each resolution you use (2 for x and y would be the upper left for example):

Eqwini.png


Bars covering all text

  • This is likely caused by an incompatible version of dgvoodoo. You can either look for a newer or older version that is compatible with your graphics card or can disable dgvoodoo by moving the d3d8.dll out of the EQ client folder and relaunching the client.
  • This issue is fixed in v2.2 client that has an updated dgVoodoo2 d3d8.dll which is compatible with AMD cards. You can download it from here http://dege.fw.hu/temp/dgVoodoo2_81_exp4.zip

Barscoveringtext.png


The game runs too fast

If you are using an AMD 7xxx series CPU in your system you may need to adjust your system's settings to avoid this issue. The following were done by different people to correct this issue:

  • "I disabled PBO and reduced clock speed to 3900 in bios then in Ryzen Master switched to normal profile and its working for me now. Game running at normal speed."
  • "I fixed my AMD 7950x. PBO off, CPU boost off, fixed 42x 100 for 4.2Ghz set clock speed. Set the Ram to 6000 with XMP II."

Use Ryzen Master to apply settings

Source thread



Items no longer needed - kept for history tracking

Retrieved from "https://wiki.takp.info/index.php?title=Getting_Started_on_Windows&oldid=6270"